ETSO-2C504a

ROTORCRAFT CONSTANT-WEAR LIFE JACKETS FOR OPERATIONS TO OR FROM HELIDECKS

LOCATED IN A HOSTILE SEA AREA

1 Applicability

This ETSO gives the requirements which adult constant-wear life jackets for use on rotorcraft operating to or from helidecks located in a hostile sea area (as defined in Annex I (‘Definitions for terms used in Annexes II to V’) to Commission Regulation (EU) No 965/2012) that are manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.

2 Procedures

2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

2.2 Specific

None.

3 Technical Conditions

3.1 Basic

3.1.1 Minimum Performance Standard

The applicable standards are those provided in ASD-STAN document prEN4862, edition P1, dated February 2022.

3.1.2 Environmental Standard

None.

3.2 Specific

None.

4 Marking

4.1 General

Marking is detailed in CS-ETSO Subpart A paragraph 1.2.

4.2 Specific

The specific marking requirements are detailed in ASD-STAN document prEN4862, edition P1, dated February 2022.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.

[Amdt ETSO/1]

[Amdt ETSO/18]