---
title: "CS 25.675 Stops — CS-25 · Avioverse"
description: "Each control system must have stops that positively limit the range of motion of each movable aerodynamic surface controlled by the system."
url: "https://avioverse.aero/regulations/easa/cs-25/subpart-d/cs-25-675"
---

# CS 25.675 Stops

Large Aeroplanes (CS-25) · CS-25 · EAR revision 26 Jan 2023

IR Implementing rule

## CS 25.675 Stops

(a) Each control system must have stops that positively limit the range of motion of each movable aerodynamic surface controlled by the system.

(b) Each stop must be located so that wear, slackness, or take-up adjustments will not adversely affect the control characteristics of the aeroplane because of a change in the range of surface travel.

(c) Each stop must be able to withstand any loads corresponding to the design conditions for the control system.

IR · CS 25.675 — CS-25 · ED Decision 2003/2/RM · CS-25 Easy Access Rules · EAR revision 26 Jan 2023

[All rules in SUBPART D – DESIGN AND CONSTRUCTION](https://avioverse.aero/regulations/easa/cs-25/subpart-d)

Consolidated from the EASA Easy Access Rules (revision 26 Jan 2023, extracted 13 Oct 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.