---
title: "AMC1 SECTION III — (b)(5) — SPECIFIC REQUIREMENTS FOR PROVIDERS OF FLIGHT PROCEDURE DESIGN SERVICES, ATM/ANS · Avioverse"
description: "CODED DESIGNATOR The coded designator of a standard departure or standard arrival route, instrument or visual, should consist of:"
url: "https://avioverse.aero/regulations/easa/atm-ans/specific-requirements-for-providers-of-flight/appendix-1/amc1-section-iii-b-5"
---

# AMC1 SECTION III — (b)(5)

SPECIFIC REQUIREMENTS FOR PROVIDERS OF FLIGHT PROCEDURE DESIGN SERVICES · Regulation (EU) 2017/373 · EAR revision 12 Mar 2025

AMC Acceptable means of compliance

## AMC1 SECTION III — (b)(5)

CODED DESIGNATOR

The coded designator of a standard departure or standard arrival route, instrument or visual, should consist of:

(a) the coded designator or name-code of the significant point followed by;

(b) the validity indicator followed by;

(c) the route indicator, where required.

AMC — Regulation (EU) 2017/373 · ED Decision 2020/008/R · ATM/ANS Easy Access Rules · EAR revision 12 Mar 2025

[All rules in Appendix 1 — REQUIREMENTS FOR AIRSPACE STRUCTURES AND FLIGHT PROCEDURES CONTAINED THEREIN](https://avioverse.aero/regulations/easa/atm-ans/specific-requirements-for-providers-of-flight/appendix-1)

Consolidated from the EASA Easy Access Rules (revision 12 Mar 2025, extracted 13 Oct 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.