---
title: "AMC1 SECTION I — (c) CONTROL ZONES — SPECIFIC REQUIREMENTS FOR PROVIDERS OF FLIGHT PROCEDURE DESIGN SERVICES, ATM/ANS · Avioverse"
description: "HORIZONTAL LIMITS The horizontal limits of a control zone should extend to at least 9.3 km (5 NM) from the centre of the aerodrome or aerodromes…"
url: "https://avioverse.aero/regulations/easa/atm-ans/specific-requirements-for-providers-of-flight/appendix-1/amc1-section-i-c-control-zones"
---

# AMC1 SECTION I — (c) CONTROL ZONES

SPECIFIC REQUIREMENTS FOR PROVIDERS OF FLIGHT PROCEDURE DESIGN SERVICES · Regulation (EU) 2017/373 · EAR revision 12 Mar 2025

AMC Acceptable means of compliance

## AMC1 SECTION I — (c) CONTROL ZONES

HORIZONTAL LIMITS

The horizontal limits of a control zone should extend to at least 9.3 km (5 NM) from the centre of the aerodrome or aerodromes concerned in the directions from which approaches will be made.

AMC — Regulation (EU) 2017/373 · ED Decision 2020/008/R · ATM/ANS Easy Access Rules · EAR revision 12 Mar 2025

[All rules in Appendix 1 — REQUIREMENTS FOR AIRSPACE STRUCTURES AND FLIGHT PROCEDURES CONTAINED THEREIN](https://avioverse.aero/regulations/easa/atm-ans/specific-requirements-for-providers-of-flight/appendix-1)

Consolidated from the EASA Easy Access Rules (revision 12 Mar 2025, extracted 13 Oct 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.