---
title: "GM1 ADR-DSN.D.245 Width of taxiways — Certification Specifications and Guidance Material for Aerodrome Design (CS-ADR-DSN) — Issue 7, Aerodromes · Avioverse"
description: "The width of the taxiway should be measured at the edge of the paved surface, or where the taxiway edge is marked, at the outside edge of the taxiway…"
url: "https://avioverse.aero/regulations/easa/aerodromes/cs-adr-dsn/chapter-d-taxiways/gm1-adr-dsn-d-245"
---

# GM1 ADR-DSN.D.245 Width of taxiways

Certification Specifications and Guidance Material for Aerodrome Design (CS-ADR-DSN) — Issue 7 · Regulation (EU) No 139/2014 · EAR revision 13 Mar 2026

GM Guidance material

## GM1 ADR-DSN.D.245 Width of taxiways

(a) The width of the [taxiway](https://avioverse.aero/glossary/easa/taxiway) should be measured at the edge of the paved surface, or where the taxiway edge is marked, at the outside edge of the taxiway edge [marking](https://avioverse.aero/glossary/easa/marking).

(b) Additional guidance on width of taxiways is given in ICAO Doc 9157, [Aerodrome](https://avioverse.aero/glossary/easa/aerodrome) Design Manual, Part 2, Taxiways, Aprons and Holding Bays.

\[Issue: ADR-DSN/4]

GM · GM1 ADR-DSN.D.245 — Regulation (EU) No 139/2014 · ED Decision 2014/013/R · Aerodromes Easy Access Rules · EAR revision 13 Mar 2026

[All rules in CHAPTER D — TAXIWAYS](https://avioverse.aero/regulations/easa/aerodromes/cs-adr-dsn/chapter-d-taxiways)

Consolidated from the EASA Easy Access Rules (revision 13 Mar 2026, extracted 13 Oct 2026) for convenience. Not the official publication — verify against the Official Journal of the European Union and the EASA publications before operational use.